The M.2 2280 NVMe SSD via PCIe Gen3x4 interface is specifically designed for niche applications for server / networking, data center, thin client and mission critical industrial alike applications.
By adopting NVMe 1.2 specifications and integrating 3D NAND MLC technology, ATP’s M.2 2280 NVMe SSD is constructed via a PCIe Gen 3x4 interface offering up to 1TB of memory capacity and boosted performance that exceed the previous bottleneck of AHCI standards, delivering Sequential Read 1,260 MB/s and Sequential Write 980 MB/s.
ATP's Next Generation Form Factor ( NGFF ) SSD with NVMe protocol and PCIe interface, delivers up to 1 TB in memory capacity and unprecedented read / write speed up to 2x ~ 3x the SATA interface bandwidth; this setup maximizes the capability of high-speed PCI Express storage devices to perform multiple I/O (in/out) operations in parallel to fulfill the demanding responsiveness for all high-end enterprise storage systems.
SSD are not created equal, while the market strives for performance in NVMe SSDs, ATP takes a step further instead in carefully considering aspects of enhancing memory longevity and reliability for mission critical environments. This includes careful selection of BOM planning with key suppliers, and adding wide temperature and extreme power cycling testing.
Heat dissipation is one major issue commonly encountered for NVMe. Through temperature feedback and optimized thermal throttling mechanism, ATP’s NVMe may avoid drastic performance drop or possible damage to controller caused by overheating.
ATP's NVMe based M.2 2280 SSD provides performance specifically tailored for an array of applications such as server/networking, data center, thin client, mission critical and industrial applications.
Complete M.2 NVMe SSD Features:
M.2 NVMe SSD
|Capacity||128GB to 1TB|
Sequential Read up to 1,260 MB/s
Sequential Write up to 980 MB/s
Random Read IOPS up to 100,000
Random Write IOPS up to 128,000
|Interface||PCIe Gen3 8Gb/s Interface, x4 Lanes|
|Operating temperature||0°C to 70°C|
TBW* (max.) : 1181TB
Dynamic Thermal throttling
LDPC(Low-Density Parity Check) & RAID Data Recovery for advanced error correction
Data Retention @ 50°C: 5 years ( with 10% P/E cycle )
Number of Insertions: 10,000 minimum
|Dimensions: LxWxH (mm)||80 x 22 x 3.5|
*(TBW varies by different write patterns)